• Blixt&Dunder - precis som det låter
  • Undrar du något? Prova chatten!
Exkl. moms Inkl. moms

Logga in

Andrews Camshaft 1 #1 Cam F/48-69 Big Twin i gruppen Reservdelar & Tillbehör / Motordelar  / Motordelar Twin Cam / Bottendel Twin Cam / Kam/Delar Twin Cam hos Blixt&Dunder AB (DS199283)
Andrews Camshaft 1 #1 Cam F/48-69 Big Twin

Andrews Camshaft 1 #1 Cam F/48-69 Big Twin

Andrews
Betyg på Andrews Camshaft 1 #1 Cam F/48-69 Big Twin i gruppen Reservdelar & Tillbehör / Motordelar  / Motordelar Twin Cam / Bottendel Twin Cam / Kam/Delar Twin Cam hos Blixt&Dunder AB
2890 kr
 
Köp trots längre leveranstid
Artikelnummer: DS199283
Leveranstid:


Low-Compression Cam

  • Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm range
  • Designed for hydraulics, but could be run with solids
  • Grind #1 is the low-compression version of an "A" grind cam for 74" and 80" models
  • Made in the U.S.A.
  • On late 77 and later engines, the pitch diameter on the camshaft, pinion gear and breather valve gear was changed. These components are not interchangeable with earlier style components unless replaced in sets only. Late 77 and later gear sets are identified by a circular groove machined in the outer face of the cam gear.


  • Grind #1 is the low-compression version of an "A" grind cam for 74" and 80" models

    Exhaust Close: 16°

    Enhet: Styck
    Produkt-typ: Cam
    Tillverkarens Art. Nr.: 212130
    Low-Compression Cam

  • Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm range
  • Designed for hydraulics, but could be run with solids
  • Grind #1 is the low-compression version of an "A" grind cam for 74" and 80" models
  • Made in the U.S.A.
  • On late 77 and later engines, the pitch diameter on the camshaft, pinion gear and breather valve gear was changed. These components are not interchangeable with earlier style components unless replaced in sets only. Late 77 and later gear sets are identified by a circular groove machined in the outer face of the cam gear.


  • Grind #1 is the low-compression version of an "A" grind cam for 74" and 80" models

    Exhaust Close: 16°

    Kundomdömen

    Se fler varor